Essenital Turbo Guide to Cod Fillet

Instructions

• 1

  Place the Joule™ Turbo Sous Vide inside a pot or large vessel (max 8 liters) and place on a trivet. Fill with cool tap water until approximately halfway between the minimum and maximum fill lines and keep the pot uncovered.

  Tip: A trivet will protect your countertop from direct contact with the hot pot or vessel. 
• 2

  Place the cod in a microwave-safe, zipper-lock freezer bag with the longest edge running along the base of the bag. Sprinkle with salt and add the oil. If cooking 2 fillets, place flat, in the bag side by side. If cooking more, use multiple bags.

• 3

  In Breville+, press Set Time & Temp at the bottom of the screen and follow the prompts to customize the cooking of your cod. Once set, lower the bag into the water against the side of the pot, while using a spatula to push it three-quarters of the way down. This will remove the air and ensures it does not float. Seal the bag and Start Turbo. 

• 4

  When the timer signals that the cod is done, carefully remove the bag from the water. Place the cod on a paper towel lined cooling rack set over a tray and pat dry.

  Tip: The cod can also be quickly seared in a smoking hot pan with a little butter.
• 5

  Transfer the cod to a serving plate and sprinkle with sea salt.

  Tip: It’s great served with herb oil.